Use T-Brace
with Ladder Jacks
How to use T-Brace with Ladder Jacks
When setting T-Braces up, gather lumber to be used - example: 2x10x16 and
2x6x16. Place ladders with Ladder Jacks approximately 14 feet apart. Place 2x10 on
Ladder Jack leaving about 1 foot.
See Figure 1.
Figure 1
Slide one T-Brace to center. Slide a T-Brace on each end approximately one foot. Pull
pins from two T-Braces, one in the center and one on an end. Leave pin in one
T-Brace on one end.
See Figure 2.
Figure 2
Insert 2x6 into T-Brace on the end that has the pin. Position 2x6 into bottom of two
T-Braces that have the pins removed.
See Figure 3.
Figure 3
Return pins into two T-Braces. Be certain to secure the locking mechanism.

Place nails or screws into the nail holes provided on T-Brace to secure boards. The
board is now secured to the T-Brace.

NOTE: All pins must be in and locked to use T-Braces.

See Figure 4 and Figure 5
Figure 4
Figure 5
Where You Can Find Us
T Brace LLC
1350 Manufacturing Street, Suite 109
Dallas, TX 75207
(866) 454-4983
Look for live demonstrations at a show
near you! see schedule

Ask for T-Brace at your local lumber yard
or hardware store. If they don't carry
T-Brace ask them to contact us.
Corporate Offices of T Brace Inc.
_________________________________________________________________________________________
Copyright © 2005 T-Brace LLC All rights reserved.

Privacy Policy - Copyright Policy - Terms of Service - Help